What this tutorial covers
Run link and mobility related analysis for NTN / multi-satellite data.
Before you start：You need access to the product and should ideally follow the tutorial using your own real parameters or data. The screenshots below were manually rematched to avoid the image/topic mismatches seen in the previous version.
Step-by-step workflow
1Open the module
Open Advanced NTN / Multi-Satellite from Network & Mobility. Confirm that the visible page really matches the tutorial topic before changing any settings.
2Configure the input
Prepare and check NTN link/trajectory data, time fields and measurement parameters.
3Run and watch the status
Map the fields and run the analysis. Watch the visible status, plot or log area while the workflow is running.
4Inspect the result
Pay special attention to latency, SNR, handover and other related results.
5Verify and iterate
With real trajectories, verify that time and unit-related fields are mapped correctly. Change one meaningful parameter and rerun so you can verify whether the output changes in the expected direction.
How to read the result
- The main output of this workflow is latency, SNR, handover and other related results.
- Read the result together with the exact inputs used for the run; a screenshot alone rarely tells the whole story.
- With real trajectories, verify that time and unit-related fields are mapped correctly.
Troubleshooting & practical tips
- If nothing changes, first confirm that the correct module is open.
- If the output looks unrealistic, check units, field mapping and input scale first.
- For comparisons, change one key parameter at a time whenever possible.